Notification, 2016

Text

Reproduced from the document India Code holds for this instrument. The Gazette prints Hindi and English side by side and this is the English; the Department's own PDF remains the authority.

EXTRAORDINARY

PUBLISHED BY AUTHORITY

MINISTRY OF ROAD TRANSPORT AND HIGHWAYS

NOTIFICATION

New Delhi, the 9th February, 2016

S.O. 411(E).—In exercise of the powers conferred by sub-section (3) of section 109 and clause (k) of sub- section (1) of section 110 of the Motor Vehicles Act, 1988 (59 of 1988), read with sub-rule (1) of rule 124 of the Central Motor Vehicles Rules, 1989, the Central Government hereby makes the following further amendments in the notification of Government of India in the erstwhile Ministry of Shipping, Road Transport and Highways (Department of Road Transport and Highways) number

S.O. 1365(E) dated 13th December, 2004, published in the Gazette of India,

(2) In the said notification, in the Table,-

(i) for serial number 11 and the entries relating thereto, the following shall be substituted, namely:- “11. The external projection on all motor vehicles other than three wheelers of engine capacity less than 500 cc and motor cycles.

IS 13942:1994, as amended from time to time, for vehicle categories mentioned therein.

Date of commencement:

13th December, 2004 Valid up to30th September, 2017 for new models of M1 category vehicles and 30th September, 2019 for existing models of M1 category vehicles;

AIS-120/2014, as amended from time to time, for M1 vehicle categories mentioned therein.

For new models:1st October, 2017 ” For existing models:

1st October, 2019”

(ii) for serial number 18 and the entries relating thereto, the following shall be substituted, namely:- “18. Identification of Controls, Tell-Tales and Indicators and Control Location and Operation Requirements on motor vehicles including agricultural tractors and construction equipment vehicles and Part-2), as amended from time to time.

For all vehicles, including construction equipment vehicles, other than agricultural tractors and two wheeled vehicles:

For new models:15th March, For existing models:

15th March, 2014;

For agricultural tractors:

1st April, 2013;

Engine capacity 37 kW or above:1st April, 2014;

For two wheeled vehicles:

For new models:

Date of commencement:

15th March, 2013 Valid up to:

30th September , 2016 For existing models:

Date of commencement:

15th March 2014 Valid up to:

30th September, 2017 18-A Location, identification and operation of Controls, Tell-tales and Indicators of two wheeled vehicles.

AIS-126/2014, as amended from time to time.

For new models:

1st October, 2016 For existing models:

1st October, 2017”;

(iii) for serial number 21(ii) and the entries relating thereto, the following shall be substituted, namely:- of motor vehicles manufactured on and from dates mentioned incolumn (4).

AIS-004 (Part 3)- 2009, as amended from time to time.

(including electric power train vehicles) :

For new models:

1st October, 2013 For existing models:

Motor vehicles of M and N category complying with Mass Emission standards for Bharat Stage IV, including electric power train vehicles:

1st October, 2015”

(iv) for serial numbers 26, 27, 28, 29 and the entries relating thereto, the following shall be substituted, namely:- Electric Power Train Vehicles - Construction and Functional Safety Requirements as amended from time to time 1st October, 2016.

27. Electric Power Train Vehicles- Measurement of Electrical Energy Consumption as amended from time to time 1st October, 2016.

28. Electric Power Train Vehicles - Method of Measuring the Range amended from time to time 1st October, 2016.

29. Electric Power Train Vehicles - Measurement of Net Power and Maximum 30 Minute Power as amended from time to time.

1st October, 2016.”;

(v) for serial number 33 and entries relating thereto, the following shall be substituted, namely:- “33. The spray suppression devices for automotive vehicles.

AIS-013 (Rev.1)/2014, as amended from time to time, for vehicles specified therein.

For new models: 1st October, For existing models: 1st October,

(vi) for serial number 40 and the entries relating thereto, the following shall be substituted, namely: “40. The interior noise level requirements for the vehicles - for transport vehicles of M2, IS 12832:2010, as amended from time to time 1st October, 2016.”;

(vii) for serial number 41 and the entries relating thereto, the following shall be substituted, namely: “41. Requirement for bumpers fitted on M1 category of vehicles IS 15901:2010, as amended from time to time 1st October, 2016.”;

(viii) after serial number 49 and entries relating thereto, the following shall be inserted, namely: “50. Test procedure for measurement of minimum ground clearance for M1 category of vehicles IS 9435: 2004, as amended from time to time 1st October, 2016.

51. Protective devices against unauthorised use for M and N category vehicles AIS-075/2006, as amended from time to time 52 Vehicle Alarm Systems and Immobilizers for M1 category, and N1 category (having GVW not more than 2 ton) AIS-076/2007, as amended from time to time Note: If other categories of vehicles are fitted with such devices, the vehicles shall comply with the requirements of AIS-076/ 2007, as amended from time to time.

ABHAY DAMLE, Jt. Secy.

Note: The principal notification was published in the Gazette of India, Extraordinary, Part II, Section 3, Sub-section

(ii) vide notification number

S.O. 1365(E), dated the 13th December, 2004 and last amended vide notification number

S.O. 2412(E), dated the 3rd September, 2015.

and Published by the Controller of Publications, Delhi-110054.

Provisions this notification answers to

Read out of the instrument itself: an enabling provision is one it says it was made under, which is the power it rests on. The rest it names without resting on.

Other instruments under the same Act

All of the The Motor Vehicles Act, 1988