Rule, 2012

Text

Reproduced from the document India Code holds for this instrument. The Gazette prints Hindi and English side by side and this is the English; the Department's own PDF remains the authority.

(The (Baxette of Jjtidia

EXTRAORDINARY

PUBLISHED BY AUTHORITY

No. 456| NEW DELHI, FRIDAY, SEPTEMBER 14, 2012/BHADRA 23, 1934 2001 ^ T W l 10 3 , -

MINISTRY OF COMMUNICATIONS AND

INFORMATION TECHNOIXXJY

(Department of Electronics and Information Technology)

NOTIFICATION

New Delhi, the 14th September, 2012

GS.R. 689(E).—In exercise of the powers conferred by the sub-section (2) of Section 96 of the Semiconductor Integrated Circuits Layout-Design Act, 2000 (37 of 2000), the Central Government here by makes the following rules to amend the Semiconductor Integrated Circuits

1. (I) These rules may be called the Semiconductor Integrated Circuits Layout-Design (Amendment) Rules, 2012

(2) They shall come into force on the date of their publication.

2.In the Semiconductor Integrated Circuits Layout- Design Rules, 2001 in rule 10 —

(a) in sub-rule (3), the words "by the bank draft", the words "by a bank draft payable to the Pay & Accounts Officer, Department of Electronics and Information Technology" shall be substituted;

(b) in sub-rule (4), for the words "made payable to Registrar", the words "made payable to the Pay & Accounts Officer, Department of Electronics and Information Technology" shall be substituted.

Printed by the Manager, Government of India Press. Ring Road. Mayapuri. New Delhi-110064 and Published by the Controller of Publications. Delhi-110054.

Provisions this rule answers to

Read out of the instrument itself: an enabling provision is one it says it was made under, which is the power it rests on. The rest it names without resting on.

Other instruments under the same Act

All of the The Semiconductor Integrated Circuits Layout-Design Act, 2000